% Deployit Oracle WebLogic Server (WLS) Plugin Manual
% 
% April, 2011

-   Preface
-   Introduction
-   WebLogic Plugin Requirements
-   Supported WLS Versions
-   Supported WLS Features
-   WLS Runbook
-   WLS Configuration Items (CIs)
    -   ApacheHttpdServer
    -   ApacheHttpdWlsPluginConfiguration
    -   ApacheHttpdWlsPluginConfigurationMapping
    -   ApacheModule
    -   WlsCluster
    -   WlsClusterResourceMapping
    -   WlsDataSource
    -   WlsDatasourceToDomainMapping
    -   WlsDeploymentPlan
    -   WlsDomain
    -   WlsEarMapping
    -   WlsEjbJarMapping
    -   WlsForeignJmsConnectionFactory
    -   WlsForeignJmsDestination
    -   WlsForeignJmsServer
    -   WlsJmsConnectionFactory
    -   WlsJmsDistributedQueue
    -   WlsJmsQueue
    -   WlsJmsServer
    -   WlsJmsUniformDistributedQueue
    -   WlsMailSession
    -   WlsMaximumThreadsConstraint
    -   WlsServer
    -   WlsServerConfigurationModification
    -   WlsServerResourceMapping
    -   WlsSharedLibrary
    -   WlsSharedLibraryMapping
    -   WlsWarMapping
    -   WlsWorkManager


# Preface

This manual describes the Deployit WebLogic Plugin.

# Introduction

The Oracle WebLogic Server (WLS) Plugin supports the deployment,
re-deployment and undeployment of a deployment package to a WLS
server.

# WebLogic Plugin Requirements

In addition to the requirements for Deployit, the WLS Plugin has
the following additional requirements:

-   the user account used to access the WLS server must have
    permission to perform the following actions:
    -   run the WLS, wlst.sh script (or wlst.bat on Windows)


The target middleware needs to be set up so that the administrative
interfaces of the target middleware can be accessed by running it
on the machine on which the administrative server of the software
is installed. Deployit does not support a setup in which the
administrative client is installed on a different machine.

For WebLogic Server this means that Deployit will use SSH to log in
to the machine on which the "admin server" is running, upload any
Python files and other files needed to a temporary directory and
then invoke the `wlst.sh` command. Afterwards any temporary files
will be removed.

# Supported WLS Versions

The WLS plugin supports the following versions of WLS:

-   **10.3.x**

# Supported WLS Features

The WLS Plugin supports the following features:

-   EAR/WAR/EJB-Jar (deploy and undeploy EAR, WAR and EJB-Jar's)
-   Apache Httpd Wls Plugin Configuration (create and destroy
    Apache HTTPD Server configuration)
-   DataSource (create and destroy datasources)
-   Foreign Jms Connection Factory (create and destroy JMS
    Connection factories)
-   Foreign Jms Destination (create and destroy JMS destinations)
-   Foreign Jms Server (create and destroy JMS Servers)
-   Maximum Threads Constraint (configure maximum thread
    constraints in the server)
-   Shared Libraries (deploy and undeploy shared libraries that are
    packaged as ear, war, ejb jar or plain jar)
-   Work Manager (configure the work manager in the server
    instances)

# WLS Runbook

When the WLS runbook is triggered, the plugin populates the
steplist with steps based on the executed task. First, the WLS
runbook determines which servers are affected by the pending task.
These are all the WLS servers that are a target of one of the
deployed items in the deployment or the WLS server that a deployed
application is running on in case of an undeploy.

The WLS runbook adds steps in the following order:

-   Undeploy EAR/WAR/EJB-Jar
-   Undeploy shared libraries
-   Activate changes
-   Delete queues and topics
-   Delete connection factories
-   Delete datasources
-   Unconfigure work managers
-   Unconfigure maximum threads constraint
-   Delete configuration files on host
-   Copy configuration files to host
-   Copy and configure libraries
-   Modify servers and clusters
-   Modify Queues
-   Activate changes
-   Copy and execute SQL scripts against databases
-   Create queues and topics
-   Create datasources
-   Configure maximum threads constraint
-   Configure work managers
-   Deploy EAR/WAR/EJB-Jar
-   Start applications

# WLS Configuration Items (CIs)

The WLS Plugin defines configuration items (CIs) needed to deploy
to Oracle Weblogic middleware. To get more information about these
CIs, use Deployit's command line interface (CLI). See the
**Deployit Command Line Interface (CLI) Manual** for more
information.

## ApacheHttpdServer

An Apache 2 web server.

*Type*:
com.xebialabs.deployit.plugin.apache.httpd.ci.ApacheHttpdServer

*Properties:*

-   **accessLogLocation(STRING)**: Location where deployit will
    create a directory where access log will be placed.
-   **apachectlPath(STRING)**: Path of the executable that will
    restart apache, e.g. /usr/sbin/apachectl
-   **configurationLocation(STRING)**: Location where deployit will
    generate apache httpd.conf fragment files.
-   **errorLogLocation(STRING)**: Location where deployit will
    create a directory where error log will be placed.
-   **host(com.xebialabs.deployit.ci.Host)**: Host on which the web
    server runs
-   **htdocsLocation(STRING)**: Location where deployit will create
    a directory (based on the vhost name) where static content will be
    placed.
-   *modules(Set<com.xebialabs.deployit.plugin.apache.httpd.ci.ApacheModule\>)*:
    Modules

## ApacheHttpdWlsPluginConfiguration

An abstraction of Apache Weblogic Plugin Configuration. It is used
to generate the configuration file which is included in the Apache
main httpd.conf file

*Type*:
com.xebialabs.deployit.plugin.wls.ci.ApacheHttpdWlsPluginConfiguration

*Properties:*

-   **name(STRING)**: Name
-   *errorPage(STRING)*: Error Page
-   *mimeMatchExpressions(STRING)*: Comma separated list of match
    expression to proxy requests by MIME type
-   *pathExpressions(STRING)*: Comma separated list of path to be
    used for proxing requests by path

## ApacheHttpdWlsPluginConfigurationMapping

Description unavailable

*Type*:
com.xebialabs.deployit.plugin.wls.ci.ApacheHttpdWlsPluginConfigurationMapping

*Properties:*

-   **source(java.io.Serializable)**: Source
-   **target(java.io.Serializable)**: Target
-   *clusters(Set<com.xebialabs.deployit.plugin.wls.ci.WlsCluster\>)*:
    Clusters
-   *sourcePropertyOverrides(List<com.xebialabs.deployit.ci.mapping.KeyValuePair\>)*:
    Overrides for properties of the mapping's source. The key is the
    property name (consult the documentation or run 'describe' in the
    CLI), the value is the value to set. Only string, integer and
    enumerable properties can be overridden. Example: Key:
    redeliveryLimits, Value: 2
-   *virtualHost(STRING)*: Virtual Host

## ApacheModule

An generic Apache 2 module.

*Type*: com.xebialabs.deployit.plugin.apache.httpd.ci.ApacheModule

*Properties:*

-   **moduleName(STRING)**: the module name, eg jk\_module
-   *modulePath(STRING)*: Path to modjk module eg
    libexec/mod\_jk.so

## WlsCluster

A WebLogic Cluster, a member of WebLogic Domain. It can have
WebLogicServers as it's members

*Type*: com.xebialabs.deployit.plugin.wls.ci.WlsCluster

*Properties:*

-   **domain(com.xebialabs.deployit.plugin.wls.ci.WlsDomain)**: The
    domain to which the WebLogic Cluster belongs
-   **name(STRING)**: Name of the WebLogic Cluster
-   *servers(Set<com.xebialabs.deployit.plugin.wls.ci.WlsServer\>)*:
    Servers in the WebLogic Cluster

## WlsClusterResourceMapping

A mapping of a WebLogic resource for a WlsCluster to a WlsCluster

*Type*:
com.xebialabs.deployit.plugin.wls.ci.WlsClusterResourceMapping

*Properties:*

-   **source(java.io.Serializable)**: Source
-   **target(java.io.Serializable)**: Target
-   *sourcePropertyOverrides(List<com.xebialabs.deployit.ci.mapping.KeyValuePair\>)*:
    Overrides for properties of the mapping's source. The key is the
    property name (consult the documentation or run 'describe' in the
    CLI), the value is the value to set. Only string, integer and
    enumerable properties can be overridden. Example: Key:
    redeliveryLimits, Value: 2

## WlsDataSource

A datasource to connect to a database.

*Type*: com.xebialabs.deployit.plugin.wls.ci.WlsDataSource

*Properties:*

-   **driver(STRING)**: The driver of the datasource, the
    classname, e.g. oracle.jdbc.xa.client.OracleXADataSource
-   **init(INTEGER)**: The initial connectionpool size.
-   **jndiName(STRING)**: The JNDI name of the datasource, e.g.
    jdbc/orderdb
-   **max(INTEGER)**: The maximum connectionpool size.
-   **name(STRING)**: The name of the datasource in the WebLogic
    configuration, e.g. Order DataSource
-   **uri(STRING)**: The JDBC uri to the database, e.g.
    jdbc:oracle:thin:@ora-prod:1521:orders
-   *password(STRING)*: The password credential for the database,
    e.g. tiger
-   *properties(STRING)*: A comma separated list of name=value
    pairs.
-   *userName(STRING)*: The username credential for the database,
    e.g. scott

## WlsDatasourceToDomainMapping

A mapping of a datasource to a WLS domain with specified targets

*Type*:
com.xebialabs.deployit.plugin.wls.ci.WlsDatasourceToDomainMapping

*Properties:*

-   **source(java.io.Serializable)**: Source
-   **target(java.io.Serializable)**: Target
-   *sourcePropertyOverrides(List<com.xebialabs.deployit.ci.mapping.KeyValuePair\>)*:
    Overrides for properties of the mapping's source. The key is the
    property name (consult the documentation or run 'describe' in the
    CLI), the value is the value to set. Only string, integer and
    enumerable properties can be overridden. Example: Key:
    redeliveryLimits, Value: 2
-   *targets(Set<com.xebialabs.deployit.plugin.wls.ci.WlsTarget\>)*:
    The targets (WlsCluster, WlsServer), where the datasource is mapped
    to

## WlsDeploymentPlan

Deployable Oracle Service bus Custumization File artifact.

*Type*: com.xebialabs.deployit.plugin.wls.ci.WlsDeploymentPlan

*Properties:*

-   **location(STRING)**: Location of the artifact.
-   **name(STRING)**: The technical name of the artifact as it will
    be used within application servers.

## WlsDomain

A WebLogic Domain.

*Type*: com.xebialabs.deployit.plugin.wls.ci.WlsDomain

*Properties:*

-   **activeHost(com.xebialabs.deployit.ci.Host)**: The host that
    runs the admin server
-   **adminServerName(STRING)**: The name of the admin server
-   **name(STRING)**: Name of the WebLogic Domain
-   **password(STRING)**: Password which is used to login to the
    WebLogic Domain.
-   **port(INTEGER)**: Port to be used by the AdminServer for this
    domain
-   **startMode(ENUM)**: Tells how a managed server is start and
    stop, default is NodeManager, others are Script or Windows Service
    -   Values: [NodeManager, Script, WindowsService]

-   **username(STRING)**: Username which is used to login to the
    WebLogic Domain.
-   **wlHome(STRING)**: The location of the WebLogic Server
    installation
-   *domainHome(STRING)*: The location of the WebLogic domain.
    Defaults to '<WebLogicHome>/../user\_projects/domains/<Name>'
-   *enableWlstShWorkaround(BOOLEAN)*: Enable workaround for broken
    wlst.sh script found in some versions of WLS
-   *wlsVersion(ENUM)*: Wls Version
    -   Values: [WEBLOGIC\_8, WEBLOGIC\_9, WEBLOGIC\_10,
        WEBLOGIC\_11]


## WlsEarMapping

A mapping of an EAR to a WebLogic target

*Type*: com.xebialabs.deployit.plugin.wls.ci.WlsEarMapping

*Properties:*

-   **source(java.io.Serializable)**: Source
-   **target(java.io.Serializable)**: Target
-   *deploymentPlan(com.xebialabs.deployit.plugin.wls.ci.WlsDeploymentPlan)*:
    Deployment Plan
-   *deploymentPlanStagingDirectory(STRING)*: Deployment Plan
    Staging Directory
-   *deploymentStrategy(ENUM)*: Deployment Strategy
    -   Values: [CLASSIC, STOP\_START, SIDE\_BY\_SIDE]

-   *keyValuePairs(List<com.xebialabs.deployit.ci.mapping.KeyValuePair\>)*:
    Key Value Pairs
-   *placeholderFormat(ENUM)*: Placeholder Format
    -   Values: [SPRING, WINDOWS\_SHELL, STARS, NONE]

-   *stageMode(ENUM)*: Deployment staging mode (default is stage)
    -   Values: [Stage, NoStage]

-   *stagingDirectory(STRING)*: Remote directory where the archives
    (ear,jar,war) are copied before deploying
-   *virtualHost(STRING)*: Virtual Host

## WlsEjbJarMapping

A mapping of an EjbJar to a WebLogic target

*Type*: com.xebialabs.deployit.plugin.wls.ci.WlsEjbJarMapping

*Properties:*

-   **source(java.io.Serializable)**: Source
-   **target(java.io.Serializable)**: Target
-   *deploymentPlan(com.xebialabs.deployit.plugin.wls.ci.WlsDeploymentPlan)*:
    Deployment Plan
-   *deploymentPlanStagingDirectory(STRING)*: Deployment Plan
    Staging Directory
-   *deploymentStrategy(ENUM)*: Deployment Strategy
    -   Values: [CLASSIC, STOP\_START, SIDE\_BY\_SIDE]

-   *keyValuePairs(List<com.xebialabs.deployit.ci.mapping.KeyValuePair\>)*:
    Key Value Pairs
-   *mdbListenerPortJndiNameBindings(List<com.xebialabs.deployit.ci.mapping.MdbListenerPortBinding\>)*:
    Bindings of message driven beans JNDI names to the corresponding
    listener ports present on the target middleware
-   *placeholderFormat(ENUM)*: Placeholder Format
    -   Values: [SPRING, WINDOWS\_SHELL, STARS, NONE]

-   *stageMode(ENUM)*: Deployment staging mode (default is stage)
    -   Values: [Stage, NoStage]

-   *stagingDirectory(STRING)*: Remote directory where the archives
    (ear,jar,war) are copied before deploying

## WlsForeignJmsConnectionFactory

Foreign connection factory represents a connection factory that
resides on another server, and which is accessible via JNDI.

*Type*:
com.xebialabs.deployit.plugin.wls.ci.WlsForeignJmsConnectionFactory

*Properties:*

-   **foreignJmsServer(com.xebialabs.deployit.plugin.wls.ci.WlsForeignJmsServer)**:
    The foreign server in which the foreign connection factory is
    included.
-   **localJndiName(STRING)**: The name that the remote object will
    be bound to in the local server's JNDI tree.
-   **name(STRING)**: The name of the foreign connection factory.
-   **remoteJndiName(STRING)**: The name of the remote object that
    will be looked up in the remote JNDI directory.

## WlsForeignJmsDestination

A foreign destination (topic or queue) is a destination on a remote
server. When this destination is looked up on the local server, a
look-up will be performed automatically on the remote JNDI
directory, and the object will be returned from that directory

*Type*:
com.xebialabs.deployit.plugin.wls.ci.WlsForeignJmsDestination

*Properties:*

-   **foreignJmsServer(com.xebialabs.deployit.plugin.wls.ci.WlsForeignJmsServer)**:
    The name of the Foreign JMS Server
-   **localJndiName(STRING)**: The name that the remote object will
    be bound to in the local server's JNDI tree
-   **name(STRING)**: The name of this foreign destination
-   **remoteJndiName(STRING)**: The name of the remote object that
    will be looked up in the remote JNDI directory

## WlsForeignJmsServer

A WebLogic foreign server representing a JNDI provider that resides
outside a WebLogic Server.

*Type*: com.xebialabs.deployit.plugin.wls.ci.WlsForeignJmsServer

*Properties:*

-   **connectionURL(STRING)**: The URL that WebLogic Server will
    use to contact the JNDI provider
-   **initContextFactory(STRING)**: The initial context of the
    foreign connection
-   **name(STRING)**: The name of the foreign server

## WlsJmsConnectionFactory

A WebLogic JMS Connection Factory

*Type*:
com.xebialabs.deployit.plugin.wls.ci.WlsJmsConnectionFactory

*Properties:*

-   **jndiName(STRING)**: Jndi Name
-   **name(STRING)**: The name of the connection factory.

## WlsJmsDistributedQueue

A WebLogic JMS Queue

*Type*:
com.xebialabs.deployit.plugin.wls.ci.WlsJmsDistributedQueue

*Properties:*

-   **jndiName(STRING)**: Jndi Name
-   **name(STRING)**: The name of the distributed queue
-   *forwardDelay(INTEGER)*: Defaults to -1
-   *loadBalancingPolicy(ENUM)*: Load Balancing Policy
    -   Values: [ROUND\_ROBIN, RANDOM]

-   *members(Set<com.xebialabs.deployit.plugin.wls.ci.WlsJmsQueue\>)*:
    Members

## WlsJmsQueue

A WebLogic JMS Queue

*Type*: com.xebialabs.deployit.plugin.wls.ci.WlsJmsQueue

*Properties:*

-   **expirationPolicy(ENUM)**: The message Expiration Policy to
    use when an expired message is encountered on a destination
    -   Values: [DISCARD, LOG, REDIRECT]

-   **jndiName(STRING)**: Jndi Name
-   **name(STRING)**: The name of the queue
-   *errorQueue(com.xebialabs.deployit.plugin.wls.ci.WlsJmsQueue)*:
    The name of the target error destination for messages that have
    expired or reached their redelivery limit
-   *expirationLoggingFormat(STRING)*: The policy that defines what
    information about the message is logged when the Expiration Policy
    is set to Log
-   *jmsServer(com.xebialabs.deployit.plugin.wls.ci.WlsJmsServer)*:
    Jms Server
-   *redeliveryDelayOverride(INTEGER)*: The delay, in milliseconds,
    before rolled back or recovered messages are redelivered,
    regardless of the RedeliveryDelay specified by the consumer and/or
    connection factory
-   *redeliveryLimits(INTEGER)*: The number of redelivery attempts
    a message can make before it is moved to the error destination

## WlsJmsServer

WebLogic JMSServer that can run on a WebLogic Server.

*Type*: com.xebialabs.deployit.plugin.wls.ci.WlsJmsServer

*Properties:*

-   **fileStorePath(STRING)**: Path to the file store that the
    JMSServer will use to store JMS messages. e.g. /var/jms/store1
-   **name(STRING)**: Name of the JMSServer. e.g. JMSServer1

## WlsJmsUniformDistributedQueue

A WebLogic JMS Uniform Distributed Queue

*Type*:
com.xebialabs.deployit.plugin.wls.ci.WlsJmsUniformDistributedQueue

*Properties:*

-   **jndiName(STRING)**: Jndi Name
-   **name(STRING)**: The name of the queue
-   *jmsServers(Set<com.xebialabs.deployit.plugin.wls.ci.WlsJmsServer\>)*:
    The JMS servers across which the queue should be distributed. These
    all need to reside on servers of the cluster to which the queue is
    targeted.

## WlsMailSession

A WebLogic Mail Session that facilitates the use of the JavaMail
API

*Type*: com.xebialabs.deployit.plugin.wls.ci.WlsMailSession

*Properties:*

-   **jndiName(STRING)**: Jndi Name
-   **name(STRING)**: Name of the Mail Session
-   *javaMailProperties(List<com.xebialabs.deployit.ci.mapping.KeyValuePair\>)*:
    The JavaMail properties to be set for this Mail Session, as
    key/value pairs

## WlsMaximumThreadsConstraint

Work Manager that defines a set of request classes and thread
constraints that manage work performed by WebLogic Server
instances.

*Type*:
com.xebialabs.deployit.plugin.wls.ci.WlsMaximumThreadsConstraint

*Properties:*

-   **name(STRING)**: Name of the Work Manager
-   **threadCount(INTEGER)**: Thread Count
-   *notes(STRING)*: Notes

## WlsServer

A standard Weblogic Server

*Type*: com.xebialabs.deployit.plugin.wls.ci.WlsServer

*Properties:*

-   **domain(com.xebialabs.deployit.plugin.wls.ci.WlsDomain)**:
    WebLogic Domain to which this server belongs
-   **host(com.xebialabs.deployit.ci.Host)**: Host on which this
    server is running
-   **name(STRING)**: Name of the WebLogic Server
-   **port(INTEGER)**: Port for the WebLogic Server
-   *arguments(STRING)*: The arguments for this server, including
    initial heapsize (e.g. -Xms64m), maxheap size (-Xms256m), and
    bootclasspath (-Xbootclasspath/p:/var/lib/addons.jar)
-   *classpath(STRING)*: Classpath entries for this server.
-   *enableJVMLogRedirection(BOOLEAN)*: Enable JVM StdOut to Server
    Log file
-   *logFileLocation(STRING)*: Absolute path of log file. Example;
    /opt/bea/user\_projects/domain/managedserver1/ms1.log
-   *stageMode(ENUM)*: Deployment staging mode (default is stage)
    -   Values: [Stage, NoStage]

-   *startCommand(STRING)*: Command that should be executed to
    start the managed server.
-   *stopCommand(STRING)*: Command that should be executed to stop
    the managed server.

## WlsServerConfigurationModification

Modification of a WebLogic server

*Type*:
com.xebialabs.deployit.plugin.wls.ci.WlsServerConfigurationModification

*Properties:*

-   **classpathAddition(STRING)**: Classpath entries to add.
-   **name(STRING)**: Name

## WlsServerResourceMapping

A mapping of a WebLogic resource for a WlsServer to a WlsServer

*Type*:
com.xebialabs.deployit.plugin.wls.ci.WlsServerResourceMapping

*Properties:*

-   **source(java.io.Serializable)**: Source
-   **target(java.io.Serializable)**: Target
-   *sourcePropertyOverrides(List<com.xebialabs.deployit.ci.mapping.KeyValuePair\>)*:
    Overrides for properties of the mapping's source. The key is the
    property name (consult the documentation or run 'describe' in the
    CLI), the value is the value to set. Only string, integer and
    enumerable properties can be overridden. Example: Key:
    redeliveryLimits, Value: 2

## WlsSharedLibrary

Deployable WebLogic shared library (Ear, War, Jar) artifact. Note
the name of the WlsSharedLibrary must be the same as the
Extention-Name specified in the MANIFEST.MF of the library.

*Type*: com.xebialabs.deployit.plugin.wls.ci.WlsSharedLibrary

*Properties:*

-   **location(STRING)**: Location of the artifact.
-   **name(STRING)**: The technical name of the artifact as it will
    be used within application servers.
-   **sharedLibraryType(ENUM)**: The type of Weblogic shared
    library.
    -   Values: [JAR, WAR, EAR]


## WlsSharedLibraryMapping

A mapping of a weblogic shared library to WebLogic middleware

*Type*:
com.xebialabs.deployit.plugin.wls.ci.WlsSharedLibraryMapping

*Properties:*

-   **source(java.io.Serializable)**: Source
-   **target(java.io.Serializable)**: Target
-   *deploymentStrategy(ENUM)*: Deployment Strategy
    -   Values: [CLASSIC, STOP\_START, SIDE\_BY\_SIDE]

-   *keyValuePairs(List<com.xebialabs.deployit.ci.mapping.KeyValuePair\>)*:
    Key Value Pairs
-   *placeholderFormat(ENUM)*: Placeholder Format
    -   Values: [SPRING, WINDOWS\_SHELL, STARS, NONE]

-   *stageMode(ENUM)*: Deployment staging mode (default is stage
    -   Values: [Stage, NoStage]

-   *stagingDirectory(STRING)*: Remote directory where the archives
    (ear, jar, war) are copied before deploying

## WlsWarMapping

A mapping of a WAR to WebLogic middleware

*Type*: com.xebialabs.deployit.plugin.wls.ci.WlsWarMapping

*Properties:*

-   **source(java.io.Serializable)**: Source
-   **target(java.io.Serializable)**: Target
-   *contextRoot(STRING)*: Context root to deploy to
-   *deploymentPlan(com.xebialabs.deployit.plugin.wls.ci.WlsDeploymentPlan)*:
    Deployment Plan
-   *deploymentPlanStagingDirectory(STRING)*: Deployment Plan
    Staging Directory
-   *deploymentStrategy(ENUM)*: Deployment Strategy
    -   Values: [CLASSIC, STOP\_START, SIDE\_BY\_SIDE]

-   *ejbReferences(List<com.xebialabs.deployit.ci.mapping.EjbReference\>)*:
    Specifies the mapping from ejb reference jndi names and locals used
    in the web.xml to bean jndi names available in middleware
-   *keyValuePairs(List<com.xebialabs.deployit.ci.mapping.KeyValuePair\>)*:
    Key Value Pairs
-   *placeholderFormat(ENUM)*: Placeholder Format
    -   Values: [SPRING, WINDOWS\_SHELL, STARS, NONE]

-   *resourceEnvironmentEntryReferences(List<com.xebialabs.deployit.ci.mapping.ResourceReference\>)*:
    Specifies the mapping from resource environment references jndi
    names and types used in the web.xml to resource references jndi
    names available in middleware
-   *resourceReferences(List<com.xebialabs.deployit.ci.mapping.ResourceReference\>)*:
    Specifies the mapping from resource references jndi names and types
    used in the web.xml to resource references jndi names available in
    middleware
-   *stageMode(ENUM)*: Deployment staging mode (default is stage
    -   Values: [Stage, NoStage]

-   *stagingDirectory(STRING)*: Remote directory where the archives
    (ear, jar, war) are copied before deploying
-   *virtualHost(STRING)*: Virtual host to deploy to

## WlsWorkManager

Work Manager that defines a set of request classes and thread
constraints that manage work performed by WebLogic Server
instances.

*Type*: com.xebialabs.deployit.plugin.wls.ci.WlsWorkManager

*Properties:*

-   **name(STRING)**: Name of the Work Manager
-   *maximumThreadsConstraint(com.xebialabs.deployit.plugin.wls.ci.WlsMaximumThreadsConstraint)*:
    Maximum Threads Constraint



